Self-Adhesive Holographic Laminate (A4)

Make your stickers shine and shimmer with our Self Adhesive Holographic Laminating Sheets. The perfect way to add sparkle to your stickers!

Styles:

• Oil Spill - Clear Holographic Film
• Stars - Clear Film with Mixed Stars Pattern 
• Shards - Clear Film with Geometric Shard Pattern
• Confetti - Clear Film with Confetti Dot Pattern

Details:

• Stylized Holographic Gloss Finish
• 80 Micron/3.1 Mil Thickness
• Sheet Size: A4 - Approx: H29.7cm x 21cm
• Patterned Clear Film with permanent acrylic adhesive
• Designed for easy application by hand, cold laminator or roller.
• Protection from Minor Scratches, Water Resistance and soft to touch.
• Suitable for indoor and Outdoor use with UV Protection.

CUTTING: Some cutting machines (Cricut/Silhouette) may find it difficult reading your registration marks when holographic laminate is applied to your materials.

• We recommend you testing out a single sheet before purchasing multiple sheets.
• Using a matte tape over the registration marks may help your machine with reading the registration marks.
• You can cut down your sheets so that they sit inside of your registration marks/area.

Instructions for Use

By Hand: Peel away a small section of backing sheet at the top of the laminate. Lay flat and Stick this section to your media of choice. Pull away the backing sheet whilst using a squeegee, ruler or large flat object to push laminate down flat.

By Laminator: Set your Laminating machine to cold setting before again peeling away a small section of backing sheet at the top of the laminate. Lay flat and Sticker the section to your media of choice. Put this section into your laminator. Then pull away the backing sheet as your media is fed through the cold rollers of your laminator.

Note: The more pressure you are able to apply the cleaner the finish of the Gloss. Apply this pressure with a soft instrument or Rolling machine to reduce scratches on final look.